Following the accident involving COSLInnovator on 30 December 2015, some 100 semi-submersible rigs approved by DNV GL will be reviewed. Preliminary assessments indicate that a limited number of rigs will be subjected to modifications or operational limitations.

The semi-submersible rig COSLInnovator was drilling for Statoil in the Troll field when it was hit by a large, steep wave. Several windows on the rig's two lower decks were shattered. One person was killed.

“Since the incident, we have made great efforts to identify what happened, understand how this could happen and, most importantly, implement actions to prevent similar incidents from occurring again,” says Ernst Meyer, DNV GL Director for Offshore Classification. “We have been working with rig owners, designers, operators and authorities towards a common goal; to ensure the safety of all those working on board the rigs.”

The incident investigation report presented by the Norwegian Petroleum Safety Authority in April 2016 concluded that the incident involving COSLInnovator has provided new knowledge that must be utilized in order to prevent similar incidents in the future. DNV GL therefore published a new technical guideline (OTG-13 – Prediction of air gap for column-stabilised units) as early as in June 2016. This gives a consistent and updated approach for calculating the air gap - the clearance between the highest wave crest and the bottom of the deck box in all relevant sea conditions.

Most rigs can operate as before

Last week, DNV GL asked all owners of DNV GL-classed semi-submersible rigs to provide updated documentation of each rig's air gap.

Rigs that, based on the new technical guideline (OTG-13), can confirm a positive air gap, will be able to operate as before without reinforcement or operational limitations. This is expected to apply to most of the semi-submersible rigs operating on the Norwegian shelf.

“I can't indicate how many rigs have negative or positive air gaps before each rig's calculations have been performed,” says Ernst Meyer.

“A limited number of rigs may not have a positive air gap, but most of these will be able to avoid changes. The prerequisite is that they are able to document a positive air gap for a specific location, or that they simply do not have windows that may be exposed to waves.”

Some rigs will need to remove windows

He elaborates on the consequences for the other rigs – those that are unable to prove a positive air gap in all sea conditions – including the hundred-year wave:

“Initially (for the next winter), these rigs will be required to remove windows in exposed zones. If the strength calculations show that further structural modifications are necessary, such modifications will be required as part of the permanent solution.

“The most important thing is that the windows are removed before the coming winter. This action eliminates the largest risk elements if a similar incident occurs,” Meyer explains. He emphasizes once again that operational limitations and limitations with regard to areas of operation may solve the air gap issue in the short term.

Rigs that are certified for worldwide operation must be documented according to North Atlantic wave data. Most rigs operate in milder areas, such as the North Sea, and can postpone modifications that may be necessary in the Norwegian Sea or Barents Sea.

DNV GL is the classification body that certifies the largest number of semi-submersible rigs, and these rigs operate under the most extreme weather conditions globally. The company works continuously to improve the class regulations used in certification work through future-oriented research and the thorough examination of and learning from incidents and accidents.

“The work behind the new guideline includes the use of updated statistical weather data and knowledge acquired from several independent model tests conducted in light of the COSLInnovator incident. We have also learned from previously conducted model tests and from operational experience after 40 years classing hundreds of similar rig types,” Ernst Meyer concludes.

About DNV GL

Driven by its purpose of safeguarding life, property and the environment, DNV GL enables organisations to advance the safety and sustainability of their business. We provide classification and technical assurance services along with software and independent expert advisory services to the maritime, oil & gas and energy industries. We also provide certification services to customers across a wide range of industries. Operating in more than 100 countries, our 16,000 professionals are dedicated to helping our customers make the world safer, smarter and greener.